MetPro offers the most comprehensive industrial packaging solutions all under one roof!

MetPro’s Metalworking Fluids Can Transform Your Production Process

Do you want to improve your packaging performance?

Are you looking to improve your production process?

Are you searching for metalworking fluids that are safe for your workers to handle?

MetPro’s Metalworking fluids are widely utilized in the metal industry during the  production of metals, not only to provide lubrication and cooling but also to remove debris. Metalworking fluids can also be utilized to improve equipment performance and increase the shelf life of your cutting tools. 

Metalworking fluids can be applied using various methods such as spraying, continuous jet application and hand dispensing. It’s vitally important to utilize a metalworking fluid that not only assists in the production process but is also safe for your workers and the environment.

Our Technical Engineers have developed a range of metalworking fluids that are not only safe for your workers but also environmentally friendly and biodegradable. MetPro’s Corro Range of Metalworking Fluids and VCI protective liquids are considered green and can be used from manufacturing right through to storage!

95% of corrosion cases are caused by deposits from the previous manufacturing process – residues of washing liquids, metalworking fluids, dust, acid or base activators or passivators during different coating types or deposits of acid gases during the process.

Metalworking Fluids are used for:

Metal Removal (MRF’s) – milling, drilling & tapping, turning, and grinding.

Metal Forming (MFF’s) - Drawing, bending, stamping, pressing, and casting.

Metal Removal Fluids are utilized to cool the chip-tool-workpiece interface/cut zone, lubricate the chip-tool-workpiece interface/cut zone, flush chips and swarf from the tool-workpiece interface/cut zone and prevent flash corrosion

Contact the Experts in Metalworking Fluid Technology: Get Started Today!

Our Metalworking Fluids comply with all statutory standards and regulations. Our metalworking fluids are environmentally friendly, biodegradable and non-hazardous. MetPro has such an extensive range of Metalworking Fluids, we’re confident that we have the most cost effective and efficient solution for you!

Metalworking Fluids would be an added benefit to any manufacturing process because:

  • Provide real cost savings
  • Environmentally friendly and biodegradable
  • Anti-Corrosion Protection
  • Ease of application and removal
  • Protection and Maintenance of tools and machines

Contact MetPro today for a brochure and samples of our metalworking fluids by filling out our form, or give us a call at 517-586-0011. We’ll be more than happy to work with you and figure out the best protection for your products.

3. Protective coatings

CorroTect 56 

MetPro’s CorroTect 56 combines VCI and contact corrosion inhibitors in a water based solution making it safer and more ecologically friendly than oils and greases. Because CorroTect 56 is diluted in water, it has a unique characteristic of leaving a thin protective coating that dries quickly. This coating doesn’t need to be removed before painting or other surface treatments.

Dilution: 10 – 12% in tap water, starting with 10 as a trial percentage.

CorroTect OAM

MetPro’s CorroTect OAM is an oil additive for VCI protection of internal spaces like gearboxes, axles, oil and fuel tanks. Instead of transportation with oil or fuel, you can add OAM and decrease the amount of filling from the typical 70% down to 5 - 10%. It has a multi-metal protection capability that includes all yellow metals.

Dilution rate: 5% of neat product as supplied in oil base, as requested by customer. Use this diluted product at 5% - 10% of volume of the article that needs protection.

CorroTect WS

MetPro’s CorroTect WS is a coating which creates a thin plastic film on the surface of the metal that it’s protecting. It dries to a thin film coating that is between 3 – 5 microns, creating an excellent barrier from the external environment and contains contact and vapor inhibitors to protect the treated surface. The film can be physically removed and can be washed with a water based cleaner or even with water itself.

Dilution: This depends on thickness of the requested layer.

1. Washing/Cleaning Liquids:

CorroClean LP

MetPro’s CorroClean LP is applied best when you use conventional spray equipment but can also be used as a dip. CorroClean LP can be used to clean metal parts or equipment while also giving highly effective corrosion protection.

Dilution: 3 – 5 % in tap water, depending on the surface condition before cleaning. 

Higher percentage for cleaning is possible if rinsing is involved (otherwise should be done with low percentage).

CorroClean PSW

MetPro’s CorroClean PSW’s main application is best used in high pressure systems because of its non-foaming characteristic. It has excellent cleaning properties and should always be used with our CorroTect range and VCI protective packaging.

Dilution: 3 – 5 % in tap water, depending on the surface condition before cleaning. 

Higher percentage for cleaning is possible if rinsing is involved (otherwise should be done with low percentage).

The main advantages of using MetPro’s CorroClean products are:

  • No longer need to oil or grease components
  • Free of hazardous contents, such as sodium hydroxide
  • Application by spraying systems and immersion baths
  • Application by brush as well as by roller
  • Long term corrosion protection if parts are properly stored after cleaning

1. Metalworking Fluids:

SyntheCool GF

MetPro’s SyntheCool GF is a metalworking fluid that can be utilized as a highly effective grinding lubricant for metal parts. SyntheCool GF can be used at high dilutions in water resulting in excellent cooling, improved visibility of the work piece and rapid settling of fine particles with excellent cost effectiveness.

Dilution: 2 – 5 % depending on roughness of grinding, suggested point to start 3%.

SyntheCut FS

MetPro’s SyntheCut FS can be diluted in water with agitation. This metalworking fluid will not form a cream or inverse emulsion like soluble oils. SyntheCut FS is specifically designed to protect ferrous and aluminium metals after the forming process, so there is no need to oil or degrease.

Dilution: 3-10% depending on the severity of operation and material.  

 

×

MetPro uses cookies in accordance with our cookie policy.

More info I understand